Help with your seawall project·Marco Island
Waterfront planning

Marco Island Seawall Maintenance & Condition Records

A useful care plan records change and assigns follow-up. It does not promise that periodic visits prevent every failure.

Keep your project details together

Create a dated baseline from safe ground

Record cap condition, visible joints, ground levels behind the wall and obvious changes at the ends. The city manual cautions about heavy equipment near the wall and explains why nearby runoff and drainage deserve attention.

Ask a qualified professional which areas require closer access or underwater review. Do not excavate, drill the cap, clear structural drains or enter the water as a routine owner-maintenance task.

Same viewpoints
Choose safe photo locations away from the edge and use them again. Label each image by date and wall section.
Separate observations
Record visible cracks, settlement, runoff or a changed wall end in plain language. Keep the professional’s diagnosis in a separate field.

Marco Island Seawall Owner’s Manual (April 2014)

Set the frequency around this wall

Discuss the wall’s known defects, age, exposure and repair history with the assessor. There is no verified universal inspection interval for every Marco Island seawall in this guide. Request a written schedule and the changes that require an earlier visit.

New voids, movement or visibly worsening damage should trigger prompt professional contact and restricted access. Compare post-storm records with the baseline rather than waiting for a routine date.

Marco Island Seawall Owner’s Manual (April 2014)

Keep observations separate from completed work

  • Dated photos and the person who made each observation.
  • Inspection scope, inaccessible components and recommendations.
  • Owner decisions and the date each follow-up was assigned.
  • Repair permits, approved plans, invoices and warranties.
  • Engineer certification and final survey when required for the work.

After a repair, add the location and scope to the baseline rather than replacing the older record. Ask the professional whether the observation plan should change. Keep a short open-items list for recommendations that have not yet been completed, including who is responsible and why they remain open.

City seawall permit application — Form 31

Worried about damage? Check the warning signs.Optional · 10 short questions · no contact details

Answer from what you already know. Stay on safe ground; do not go near the edge or into the water to check. You can choose “Not sure” for any question.

Skip this and go to the request form

1. Holes, sinking ground, or soil washing out behind the wall?
2. Is the wall leaning or bulging toward the water?
3. What cracks have you noticed?
4. Gaps, missing pieces, or soil coming through the joints?
5. Is the top broken or crumbling, or is metal showing?
6. Are there rust stains on the wall?
7. Does water come over or through the wall at very high tides?
8. Has there been a major storm since the wall was last checked?
9. About how old is the wall?
10. When was the last professional inspection?
What this check is based on

The questions cover signs shown in the City of Holmes Beach seawall manual (pages 5–13): soil loss, wall movement, open joints and damaged concrete.

Show sourcesHide sources
Your next step

Keep your project details together

Use these questions when you speak with a professional. If you send the form below, we pass your details to a local marine contractor.

Getting your form ready…

Let’s get your seawall project moving.

Tell us what needs attention. Start with your address and a few details.